|Image Sensor||1/2.9″ 2 Megapixel progressive CMOS|
|Effective Pixels||1920(H) x 1080(V)|
|IR Distance||Distance up to 7m (23ft)|
|IR On/off control||Auto/ Manual|
|Noise Reduction||3D DNR|
|Angel of View||103°(H), 55°(V)/ 87°(H), 47.5°(V)|
|Frame Rate||Main Stream: [email protected] Sub Stream: [email protected]|
|Audio input||Built-in Mic|
|Audio output||Built-in Speaker|
|SD slot||Micro-SD Slot (up to 128GB)|
|Eclipse cloud storage||Support|
|Network||Wi-Fi IEEE 802.11 b/g/n 2.4 GHz|
|Power Supply||DC 5V/1A|
|Operating conditions||-10°C(14°F)～45°C(113°F), less than 95% RH|
Download Eclipse Home from Apple store or Android Store below.
Mobile app & Device Setup
Download the Eclipse Home App
- On your mobile device, go to the App Store (for iOS devices) or the Play Store (for Android devices)
- Search for “Eclipse Home”
- Download and install the Eclipse Home app on your mobile device
Create or Log in to Your Account
If this is your first Eclipse Home product, you will be asked to set up an account.
To set up an account:
- Open the Eclipse Home app.
- Select “Register.”
- Follow the in-app instructions to create a new account.
If you already have another Eclipse Home device installed, simply open the Eclipse Home app.
Use your email or phone number to register a new account with us. Choose the country code that corresponds to your location.
You will receive an email or text message with a code to verify your account.
Click on the + Sign to Add a New Device
Tap the + Sign on the top right hand corner, then select Security Camera.
Power on the Door Bell Camera and make sure the door bell button is flashing then click on next step.
Confirm or add your home Wi-Fi network and enter the password for your home Wi-Fi network and select confirm.
The application will now prepare a unique QR code to pair the device with your phone. Click continue to view the QR code and place the QR code in view of the camera.
The camera will beep to confirm it has seen the QR code. Press I Heard a Prompt button when you hear the beep from the camera.
The app will then program the camera Wi-Fi settings and marry the two devices to your account.
Give your camera a simple name that you can latter reference and add it to a room group. Press Done when complete.
The camera will now show a live stream and you are ready to use the camera and app.